Molding

At Global Interconnect, all our molded components are custom. With our vertical and horizontal molding machines we can produce insert molded assemblies and high volume precision plastic parts.

COMMON APPLICATIONS

  • LIM (liquid injection molding)
  • Low pressure molding
  • Insert molding
  • Horizontal molding

Expert molders of custom plastic connectors and components.

Our molding capabilities range from simple cable strain reliefs to high end connector components and enclosures. Our vertical molding machines enable us to mold around other materials or assemblies to produce connectors, encapsulated PCBAs, and cable strain reliefs. These machines can mold a variety of materials such as PVC, PP, TPU, ABS, PC, PA and others.

We use our horizontal molding machines for more complex parts and materials such as precision connector components with thin wall requirements. These machines can produce parts at low cost from materials such as PSU, PPSU, LCP, PPS, and others.

Insert molded connector and probe
Insert molding strain reliefs and connectors - Vertical injection molding line
Injection molded clam shells
Injection molded connector with LIM silicone strain relief
Connector insert molding - Pins loaded in insert mold
Injection molded locking connector with insert molded strain relief
Liquid injection molding - Silicone molding
Molded Boot
Insert molded connector with insert molded strain relief

“The degree of professionalism you project and the attention you show our company in meeting our needs is refreshing”

- Onset

MORE TESTIMONIALS

Mechanical Testing


  • Ingress protection
  • Temperature
  • Pressure
  • Autoclave
  • Impact
  • Creep
  • Hardness
  • Bond strength
  • Insertion/extraction/retention force
  • Endurance
  • UV
  • Chemical

Electrical Testing


  • Rated current
  • Insulation resistance
  • Contact resistance
  • Dielectric strength

An early stage dental equipment and technology company was experiencing quality issues with their C02 laser. We had the solution.

Two separate umbilical cables on the laser were splitting and were not esthetically pleasing. So, with laser-like precision, we went to work.

SEE CASE STUDY

Quality Assurance

We build quality into the entire process from the ground up by performing our own routine factory audits of our assembly partners and raw material suppliers. As an FDA registered ISO-13485 and ISO-9001 certified solutions provider, reliability is engineered into our products every step of the way.

QUALITY CERTIFICATIONS

We are more than the products we build

You won’t find what we offer in a catalog, but you will find it invaluable. Especially when you've got a problem in need of a solution.

OUR CAPABILITIES